2022.01.16 06:58 younes_alturkey Noob question: won't the airdrop half the prices of all copied ERC-20 tokens?
I'm wondering about the value of airdropped tokens on Pulsechain. It's impossible that they will retain the same value as the originals cuz that means everyone gets to double their portfolio overnight which will break the market.
Can someone elaborate on the value the airdropped tokens.
submitted by younes_alturkey to HEXcrypto [link] [comments]
2022.01.16 06:58 ElwinLewis We have 20,000 members here. Why are there only 3 positive comments on MARVELS first post about Veve on Facebook? If you leave a comment, please be respectful and try to use facts and not insults.
2022.01.16 06:58 Jixianite Regarding Monks, are they underpowered or not?
I personally think they're a bit underpowered compared to the other martial classes. They need Ki to do most of their unique stuff, have a lower maximum amount of attacks overall without using Ki (if they use their bonus action, it's 3 vs the fighter's 5 if they dual wield at 17th level), and their Ki amount is absolute garbo (given, it restores on a short rest, but it still makes them not viable for long running conflicts where you can't take a moment to rest.) But I'm hoping I've just missed something. Could you guys please present arguments as to why they're not so I don't feel bad about picking the class, or suggest ways to make it better if you can't?
submitted by Jixianite to DnD [link] [comments]
2022.01.16 06:58 Janteriva Graphic settings in HLL
Yust a little question on the graphic settings and a tip in hll.
I run high settings atm, and are getting around 55-70 sometimes 80 fps in certain areas. Heavly crowded and much going on it dipd last night to 40-45 in kursk. That was unplayable.
Tried mid settings and hit 100fps + but the gpx was unbearable since have been used to high. Grass and movement was very diff.
So my question is: any tip on a certain settings that can incr the fps but not have to go to mid settings on all? Like shadows etc?
Ryzen 5600x Gtx 1660 super dual evo 16gb ram.
And yeah if no some dont know if you set dx12 in steam settings for the game it shold run better.
submitted by Janteriva to HellLetLoose [link] [comments]
2022.01.16 06:58 Anatolian_Mongol 188 boylarında fit bir gencim 76 kiloyum kizlari truva ati onune beklerim (fotograftaki ben)
|submitted by Anatolian_Mongol to Cagneliler [link] [comments]|
2022.01.16 06:58 LetTheDogeOut W: TSE 50 cal machine gun H: caps
2022.01.16 06:58 Purple_Monkey34 What past Female wrestler do you think could come back and be a really good Manager for another female wrestler?
2022.01.16 06:58 revfitz You might be a…
|submitted by revfitz to WitchesVsPatriarchy [link] [comments]|
2022.01.16 06:58 softmilfie wanna see my bump grow? 🌱💗
|submitted by softmilfie to ClothedPreggo [link] [comments]|
2022.01.16 06:58 ponderifv SLPT : Take a little weight off your checked luggage
|submitted by ponderifv to ShittyLifeProTips [link] [comments]|
2022.01.16 06:58 DankuBot If it’s brown, beat it down
|submitted by DankuBot to dankmemesdaily [link] [comments]|
2022.01.16 06:58 theprestigous liberals fucking OWNED
|submitted by theprestigous to Destiny [link] [comments]|
2022.01.16 06:58 LordOfCogs Adhesion problem when printing spring
I'm trying to print tower from Prusament spools but I repeatedly fail with the spring part. When I try to tune first layer using 'normal' methods (built-in and printing box 25x25) it come up fine but every time I try to print the spring the nozzle seems to strip the filament from the bad.
I tried to move the Z offset by 0.0025 in increments but it doesn't help. I also tried to slow down speed to 1 mms/s for first layer but neither of those thing helped.
I have Prusa printer, use PrusaSlicer with 0.2 quality/Prusa PTEG profile. No changes except speed for subsequent prints. Textured sheet. Any idea how can I improve adhesion?
PS. If you downvote please explain why so I can improve in the future.
submitted by LordOfCogs to 3Dprinting [link] [comments]
2022.01.16 06:58 paul_marvin Kabhie Main Yahaan Nahin | Mamuli Chor
|submitted by paul_marvin to indie [link] [comments]|
2022.01.16 06:58 bitsbydr Watch "DIY Mini Macrame plant hanger | Easy macrame plant hanger tutorial #14" on YouTube
|submitted by bitsbydr to macrame [link] [comments]|
2022.01.16 06:58 Totally_Not_Firni Selling your kidney for a drawing of a monkey
|submitted by Totally_Not_Firni to WhitePeopleTwitter [link] [comments]|
2022.01.16 06:58 ad-on-is Does anyone else find the new speed of Chess.com puzzles a bit stressful?
Since the last update, in the Chess.com mobile app, computer moves are triggered imidately after making a move, which totally stresses me out.
There used to be a delay of at least 500ms in the previous versions of the app.
Is it just me, or does anyone else feel the same?
submitted by ad-on-is to chess [link] [comments]
2022.01.16 06:58 tizzioaccaso I need to build an helicopter, how can I build it?
2022.01.16 06:58 MathematicianBrief76 🤖Robot Shiba Inu🤖Stealth Launched 10 Minutes🤖 Ownership Renounced 🤖 Early Low Cap just launched, the Next x1000 GEM 💎, Unique & Genuine, ✅ Focused to learn people how to get financial freedom.
🤖Robot Shiba Inu🤖Stealth Launched 10 Minutes🤖 Ownership Renounced 🤖 Early Low Cap just launched, the Next x1000 GEM 💎, Unique & Genuine, ✅ Focused to learn people how to get financial freedom.
🤖Robot Shiba Inu🤖
Contract : 0x44b2e0e0a4f4e92673a6a7d424d2f3d8c254ea2f
🤖 BUY PancakeSwap: https://exchange.pancakeswap.finance/#/swap?outputCurrency=0x44b2e0e0a4f4e92673a6a7d424d2f3d8c254ea2f
🤖Let buy and hold Robot Shiba Inu🤖
🌟Tax Buy/Sell : 0%
💯Liquid will be locked .
This is an hyper-deflationary meme token
The altcoin season is coming and the hype around them is growing. 🔭
It's just launched and market cap will be extremely small! Could be another chance to get in
Meet Robot Shiba Inu
Still very early, just Launched and market cap will be extremely small! Could be another chance to get in on the next Robot Shiba Inu
Building on the Robot Shiba Inu hype, Robot Shiba Inu Is aiming to be a more stable coin due to its redesigned rebase functionality and tokenomics.
Coinhunt, Coinsniper & Other
Reddit CMS & other crypto trending posts -
CoinMarketCap - Stealth swap!
Coinecko - Stealth swap
Crypto influencers marketing push
Coinsniper ads coming
Running ads on different platforms
Amazing Gem with Locked LP And Burnt - and since all is fed up with rugs, we decided to create a friendly and real contract for the community
Solidity Finance Audit to ensure contract is safe for our investors
💎Large social media influence! 12,000 followers on Twitter and 5000 members in telegram
Multisig contract which means marketing funds and liquidity cannot be removed without the whole team signing each transaction
Polite and professional team with active mods
Coming together is the beginning, staying together is progress and working together is success
👀Website, White paper & roadmap to be released asap within a day
Website and roadmap to be up
Scheduled CMS for consecutive pumps and to kickstart the popularity of this token
Use case confirmed
submitted by MathematicianBrief76 to NewAltCoins [link] [comments]
2022.01.16 06:58 Amalyano I’m boutta make a dirty move.
2022.01.16 06:58 LifeMathMoney The only real sports are the ones that involve fighting, conquering nature, and lifting heavy things.
2022.01.16 06:58 scarlettjade214 Don't Forget To Check Out All Of My Other Social Medias! 😘
|submitted by scarlettjade214 to ScarlettJade [link] [comments]|
2022.01.16 06:58 1MillionDollarMeme Don't sell yourself short, but don't give up on work!
It's been amazing to see this sub grow and the increasing support for fair treatment and fair wages.
But, if I've learnt anything during covid, not working or having any reason to get out of bed is the most miserable and depressing way to spend time. Your confidence and self-worth declines and you fall into a downward spiral that can be hard to recover from.
So work matters, learning and being hopeful and seeing some positive future matters. The choices you make will ultimately turn you into the person you become.
I'm now old enough to see how the paths people take work out, but it is never too late to change the path you are on.
What matters is that you have a reason to get paid - you need a skill, which always comes with experience and practice. You are not born with skills, you develop them so that they are worth something. And the best way to become an expert at anything is to push yourself outside of you comfort zone and capability. The further your push yourself, especially when others give up, the more valuable you become to employers and to your own self worth.
See every job you do as a place to develop. There is always something to learn:
What is it that makes a manager bad? How can you be better?
How does a business make money? How would you change things?
How do good people deal with bad customers? What would you do differently?
How are things made? Can you make things more efficiently?
What do people ahead of you have more of? Confidence? Training? Contacts?
Who around you is who you want to be? Are they rich? Does that make them happy? Are they liked? Do they have a happy family?
Learn, adapt, hone your skills so you can grow to be the person you want to be. You will quickly overtake the assholes, and become a better person. Keep doing the right thing, keep learning, keep ahead of the game playing by being great at what you do.
Ultimately, see the positive in what you can, learn from everything and push yourself to be better. That doesn't mean getting trodden on by work, or suckered into pointless activity. Keep moving to you on the right path, don't sell yourself short.
Oh, and learn excel.
Sorry for the long rant. Good luck everyone!
submitted by 1MillionDollarMeme to antiwork [link] [comments]
2022.01.16 06:58 ToryFirstOfHisName What serious film or song would be ruined if the title were written in 'CaMeL cAsE'?
2022.01.16 06:58 geoffreyjm ITAP Of Stanley
|submitted by geoffreyjm to itookapicture [link] [comments]|